ASCO K3A672U Aluminum Body High Pressure Pilot Operated Fuel Gas Shutoff Valve, 1-1/4" Pipe Size, 2-Way Normally Closed, Nitrile Butylene Sealing, 1.75"
Dispensing market. The EX40 is also an excellent valve to control the fl ow of high pressure air, water, hydrogen, nitrogen, and other gases or light liquids compatible with materials of construction. The EX40 is the highest pressure valve in our collection and offers a cartridge design that alleviates your demanding maintenance requirements.
Aluminum Body Solenoid Valves 1/8" to 3/4" NPT Features • Lightweight, low-cost valves for air service • Ideal for low pressure applications • Provides high flow, Cv up to 9.5 • Air service Solenoid Enclosures Nominal Ambient Temp. Ranges AC: -40°F to 125 °F (-40°C to 52°C) Approvals CSA certified, UL listed and FM approved.
Aluminum Body Solenoid Valves 1/8" to 3/4" NPT Features † Lightweight, low-cost valves for air service † Ideal for low pressure applications † Provides high flow, Cv up to 9.5 † Air service Solenoid Enclosures Nominal Ambient Temp. Ranges AC: -40°F to 125 °F (-40°C to 52°C) Approvals CSA certified, UL listed and FM approved.
403222. $4.95 EA. T400 E-Quick® Electronic Shift Billet Aluminum Valve Bodies. Great for racers who can’t use an air shifter and need computer controlled shifting, the E-Shift is a Reverse manual, (PRN123) billet aluminum valve body for high performance applications with Low Gear Band Apply.
Description: The Breather Valve is design for enclosure, container transit cases and similar application where requires a manual vacuum pressure relief during pressure change cause by temperature change, height change. The container is hard to open under a vacuum differentials. Actuation: Manual
For a low-pressure seal around plastic and soft metal tubing, these valves have push-to-connect fittings. Design a valve specifically for your process media and set pressure. Choose from a valve for air, inert gas, water, hydraulic oil, fuel oil, gasoline, or diesel fuel and a set pressure from 150 to 3, 300 psi.
VALVE TRIM MATERIAL TEMPERATURE RANGE Note:- Cold working pressure rating (CWP) decreases as temperature increases. Refer to ASTM P/T charts. Minimum Temperature will vary from -100ºC to 0ºC according to grade of CR13 and treatment. Must be charpies impact tested if lower than -29ºC. Many of the above valve body and trim material ...
Performance o Maximum Allowable Working Pressure (MAWP) variable up to 10 000 psia / 69 MPa / 690 bar o Burst Pressure: 1.5 to 2.5 MAWP o Check valve cracking pressure: 15 – 30 psi o Pressure relief valve set pressure up to 4500 psia / 28 MPa / 280 bar o Exceptional endurance and lifetime o Reverse leak rates typically < 0.1 scc/min Extreme Conditions o Proven performance over
High Flow • Aluminum Bodies Main Pulse Valves with Integral Fittings 3/4" to 1 1/2" • Air and Inert Gas Only Solenoid Enclosures Nominal Temp. Ranges Ambient: AC constructions: 0˚F to 185˚F (-18˚C to 85˚C); 150˚F (66˚C) for valves with HYT diaphragms Fluids:
Offer valves protection against dirt, dust, moisture and insects, without obstructing flow. Versa Selector. H Series. H Series. Versa H Series in aluminum offers both pneumatic and hydraulic high pressure valves. Learn More. K Series. K Series. A valve system that combines compact design and stacking modular manifolds with easy maintenance.
Dispensing market. The EX40 is also an excellent valve to control the fl ow of high pressure air, water, hydrogen, nitrogen, and other gases or light liquids compatible with materials of construction. The EX40 is the highest pressure valve in our collection and offers a cartridge design that alleviates your demanding maintenance requirements.
FTI Billet Auminum Powerglide Trans-brake Valve Body. F2514PB: Pro Trans-brake F2514B2: Bracket Trans-brake F2514PBM: Mud Trans-brake F2514PBHL: Hi/Lo Trans-brake. Includes:-Machined in house billet valve body-billet filter spacer for FTI valvebody only-hand fit trans-brake valve-manual valve-new servo spring-(17) reverse springs-Dacron high ...
BuTech High Pressure Valves are designed for liquid and gas flow control in petroleum, chemical, power generating and general industrial applications. Available in a variety of body styles, the valves are designed for operation at temperatures ranging from-100° to +600°F (-73° to +315°C). Optional packings
Bulkbuy Industrial Valve Body Aluminum Die Casting Part Made in China price comparison, get China Industrial Valve Body Aluminum Die Casting Part Made in China price comparison from High Pressure Die Casting, Aluminum Die Casting manufacturers suppliers on Video Channel of Made-in-China.
High Pressure Valve (to 60,000 psi) Features: • Temperature Rated -423° to 1200°F (-252° to 650°C) with options ... • Cold-worked type 316 or 15-5PH stainless steel body with aluminum bronze packing gland and on-rotating stem ... is ensured by use of heat and purchase order codes etched on valve body that also include model number, MAWP ...
Solenoid Valve Body Only / Pressure Vessel (475) Solenoid Valve Coil Only (106) Valves - Standard (13) Valves - Process Control Valves (95) View 4 More; Show Less; Valve Type. 2-Way, Normally Open (32) 2-Way, Normally Closed (54) 3-Way, Normally Closed (82) 3-Way, Normally Open (40) Product Lead Time. Unassigned (58) Ships in 24-48 Hours (M-F ...
Ball Valve Carbon Steel (ASTM A 216, Grade WCB) Stainless Steel (ASTM A 351, Grade CF8M) NPT Ends Seal Welded High Pressure Ball Valve APPLICATIONS Industrial and Oil/Gas piping applications where the safety of seal welded construction is desired, the high flow capacity of full bore design is required, and operating pressures are 2160 PSIG or ...
HOT BOX Valve Enclosures. 10 products. Valve enclosures protect backflow prevention devices, valves, and pumps from freezing while allowing service access. They are for use in irrigation, plumbing, fire, water, wastewater, and utility applications. View More.
Body size, Valve Body material Port size Orifice diameter 10A, N.C. Aluminum 1/8 10 w e r e VXZ2 3 0 A A r Voltage Electrical entry Grommet 24 VDC Select from “Flow rate — Pressure.” ¡ Body material ¡ Port size ¡ Orifice diameter Item Selection item Item Selection item q
Performance o Maximum Allowable Working Pressure (MAWP) variable up to 10 000 psia / 69 MPa / 690 bar o Burst Pressure: 1.5 to 2.5 MAWP o Check valve cracking pressure: 15 – 30 psi o Pressure relief valve set pressure up to 4500 psia / 28 MPa / 280 bar o Exceptional endurance and lifetime o Reverse leak rates typically < 0.1 scc/min Extreme Conditions o Proven performance over
18R Series valves are fabricated from special materials to provide exceptional corrosion resistance and leak integrity.The body and lower stem of 18R Series valves are manufactured from Veriflo’s proprietary VeriClean™ low sulfur, 316L stainless steel and is internally electropolished. The diaphragm is a high-strength cobalt-based alloy.
Oct 29, 2021 Process Valves for Air, Water, Liquids, and Steam. STC's high performance line of solenoid process valves offer a wide range of capabilities to suit your unique operating conditions. Several materials are available, including brass, 304 Stainless Steel, 316 Stainless Steel, PTFE (Teflon), and aluminum. ATEX and Explosion-Proof coil options, as ...
High Flow • Aluminum Bodies Main Pulse Valves with Integral Fittings 3/4" to 1 1/2" • Air and Inert Gas Only Solenoid Enclosures Nominal Temp. Ranges Ambient: AC constructions: 0˚F to 185˚F (-18˚C to 85˚C); 150˚F (66˚C) for valves with HYT diaphragms Fluids:
The Aluminum bonnet and valve body of the Model 72 makes it a light weight and versatile product. The Fairchild Model 72 pneumatic regulator features control sensitivity of 2" water column and a supply pressure effect of less than 0.5% to deliver consistent and reliable precision accuracy to maintain your desired set point regardless of supply ...
Aluminum Body - JEKON” is the brand, who Offers Cast Iron And Alluminium, Butterfly Valve With CF8/CF8M/CF3M SG Iron Disc With On-off And Modulating Type Manual Motorized Opreations. +91 98240 76112 info@jekonvalves
Dispensing market. The EX40 is also an excellent valve to control the fl ow of high pressure air, water, hydrogen, nitrogen, and other gases or light liquids compatible with materials of construction. The EX40 is the highest pressure valve in our collection and offers a cartridge design that alleviates your demanding maintenance requirements.
403222. $4.95 EA. T400 E-Quick® Electronic Shift Billet Aluminum Valve Bodies. Great for racers who can’t use an air shifter and need computer controlled shifting, the E-Shift is a Reverse manual, (PRN123) billet aluminum valve body for high performance applications with Low Gear Band Apply.
High Pressure Equipment Company has developed a line of High Pressure products to assure safe and easy plumbing for 30,000, 40,000 and 60,000 psi. These needle valves, fittings, line filters, check valves, safety heads, rupture discs, anti-vibration gland assemblies, tubing and nipples are engineered to the highest standards of repeatable quality.
High Pressure Valve (to 60,000 psi) Features: • Temperature Rated -423° to 1200°F (-252° to 650°C) with options ... • Cold-worked type 316 or 15-5PH stainless steel body with aluminum bronze packing gland and on-rotating stem ... is ensured by use of heat and purchase order codes etched on valve body that also include model number, MAWP ...
Bulkbuy Industrial Valve Body Aluminum Die Casting Part Made in China price comparison, get China Industrial Valve Body Aluminum Die Casting Part Made in China price comparison from High Pressure Die Casting, Aluminum Die Casting manufacturers suppliers on Video Channel of Made-in-China.
Ball Valve Carbon Steel (ASTM A 216, Grade WCB) Stainless Steel (ASTM A 351, Grade CF8M) NPT Ends Seal Welded High Pressure Ball Valve APPLICATIONS Industrial and Oil/Gas piping applications where the safety of seal welded construction is desired, the high flow capacity of full bore design is required, and operating pressures are 2160 PSIG or ...
when determining pressure/temperature ratings of valves used in accordance with the ASME standard. 2. Table information is extracted from the Valve–Flanged, Threaded, and Welding End, ASME Standard B16.34. These tables must be used in accordance with the ASME standard.
HOT BOX Valve Enclosures. 10 products. Valve enclosures protect backflow prevention devices, valves, and pumps from freezing while allowing service access. They are for use in irrigation, plumbing, fire, water, wastewater, and utility applications. View More.
LOW PRESSURE CONNECTION 1/8 FEMALE NPT HIGH PRESSURE CONNECTION Ø7-7/8 [200] 6-13/16 [173.2] 55/64 [22] x2 AT-101NA-ADPS, shown with VS0 port valve configuration PRESSURE LIMITS Port/Valve One Pressure Port Connected Both Pressure ... Enclosure AT ATEX/IECEx approved enclosure Housing Material 101NA Aluminum enclosure Series ADPS ADPS ...
Cleaned and bagged for oxygen service and other high-purity applications, these valves can withstand the extreme cold of liquid argon, liquid nitrogen, and liquid oxygen. They spring fully open at the set pressure and remain open until the system pressure is restored below the set pressure. All have a vented relief port to exhaust discharge directly.. For technical drawings and 3-D models ...
Versa offers a range of bubble tight, leak proof, high pressure pneumatic and hydraulic valves that are ideally suited to the unique needs of the oil and gas industry. They range in size from .7 GPM to 10.5 GPM. The valves are available in 2, 3, and 4-way flow functions with solenoid and pilot actuators. All the valves are constructed with 316 ...
Powerglide Valve Body and Parts. Powerglide Valve Body kits and Parts by FTI Performance. FTI Offers a wide variety Powerglide valve bodies and valve body parts for full manual and trans-brake valve bodies. 1 - 12 of 14 items.
It’s made of billet 6061 aluminum, meaning it’s 50 percent lighter than steel valve body designs. With its ultra-fast transbrake release and high-pressure output (255+ psi), it’s perfect for the racing pro and rising star alike. The upgraded valve body is CNC-machined, meaning that each one is precision cut using computer-guided machinery.
Aluminum HV angle valve body is high purity aluminum and connected KF flanges. Its 10 million cycle and leak rate Show All. All Metal Valves. ... APC butterfly valve controller system features is integrated pressure controller and accurate pressure control. Show All. Check Valve.
Bulkbuy Industrial Valve Body Aluminum Die Casting Part Made in China price comparison, get China Industrial Valve Body Aluminum Die Casting Part Made in China price comparison from High Pressure Die Casting, Aluminum Die Casting manufacturers suppliers on Video Channel of Made-in-China.
HIGH PRESSURE SOLENOID VALVE SVH-140 Series U Stainless Steel Body U Models for Gas or Liquid U ½ to 2" Ports U Pressures up to 1500 psi (Depending on Model) The powerful, full port SVH-140 Series is great for a wide range of flow rates, temperatures, and a wide range of fluids and gases. It has become a popular choice for cryogenic conditions and
Add air and hydraulic fluid to high-pressure struts, tanks, and hydraulic accumulators— these fill valves withstand pressures up to 5, 000 psi. They meet MIL-PRF-6164, a military spec for high-pressure pneumatic valves used on aircrafts. Their stainless steel body resists rust in wet environments.
Body brass, stainless steel, aluminum, steel Other characteristics high-pressure, high-flow, low-pressure, standard, waterproof, with threaded connection Temperature. Max.: 180 °C (356 °F) Min.: -30 °C (-22 °F) ... Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure.NoteUse of filter in the inlet port is ...
Body Materials–Available to suit a wide range of exposures including: 316L, 430F and 303 Stainless Steel; hard-coat anodized low-copper aluminum or brass. Wide Pressure Range– From 0 to 215 PSI, the valves are ideally suited for valve actuation.
one-piece body; high-performance resilient seat bonded to a solid backing ring, three heavy duty bearings, and a blow-out proof shaft to the full valve rating; dead end service with downstream flange attached. BOS-CL valves have bi-directional bubble-tight shutoff to the full valve rating; dead end service with downstream flange attached.
• Pump manifold block valves • High-pressure mud mixing lines • High-pressure drilling system block valves The DEMCO Series DM gate valves are available in ASME Classes 600, 900, and 1500. They also are available in API working pressures 2000, 3000, and 5000 psig (not API monogrammed). Series DM 3” (80 mm) ASME 900/1500 Gate Valve A E F
・Improved environmental resistance due to the stainless steel coil cover [IP67 enclosure] ・Body material: Stainless steel, Brass/Bronze, Aluminum ・Environmental resistance: IP67 enclosure (IP65 for models with a DIN terminal) ・Space saving Compact: Valve volume reduced by 25% (Compared with the existing model), Lightweight: Weight reduced by 30% (Compared with the existing model ...
The FK Series Polypropylene Butterfly Valves incorporate many features of our industrial FK valve, yet the all Polypropylene construction and EPDM liner make this valve the perfect choice for water and light industrial applications. The special trapezoid shape of the liner and serrated body cavity guarantee a bubble tight seal while keeping ...
Valve construction Withstand pressure Body material Seal material Enclosure Environment Rated voltage Allowable voltage fluctuation Allowable leakage voltage Coil insulation type Pilot operated 2 port diaphragm type 2.0 MPa (Resin body type 1.5 MPa) Aluminum, Resin, C37 (Brass), Stainless steel, CAC407 (Bronze casting) NBR, FKM, EPDM Note 3)
Aug 17, 2021 Table 1. North American V246 materials Nominal valve size 3/8 in. to 3/4 in., commercial 1 in. to 2 in., commercial Maritime, all sizes Material Body Cast brass Cast iron/rust resisting finish Cast bronze Seat Aluminum bronze Aluminum bronze MONEL Disc BUNA‑N BUNA‑N BUNA‑N Disc cup Brass Brass MONEL Disc stud Brass Bra...